真空滚揉机保养：

Maintenance of vacuum rolling machine：

真空滚操机的消费进程复杂,由于处在一个真空的环境,因而消费出来的食物都十分洁净卫生,可以契合人们运用的规范，而且整个腌制进程十分迷信严谨，因而肉的滋味也可以拿捏的很棒，因而才会有更多的人选择运用真空滚揉机了。

The consumption process of vacuum rolling machine is complex. Because it is in a vacuum environment, the food consumed is very clean and hygienic, which can meet the standard of people's use. Moreover, the whole curing process is very superstitious and rigorous, so the taste of meat can be very good. Therefore, more people choose to use vacuum rolling machine.

1、每次任务完毕翻开真空油水别离器底阀开关,放尽积水。肃清真空吸入物质。清洗真空油水别离器保证真空管路疏通。

1. At the end of each task, turn on the bottom valve switch of the vacuum oil-water separator and drain the water. Clean up vacuum inhalation. Clean the vacuum oil-water separator to ensure that the vacuum pipeline is unblocked.

2.真空泵应该每月-次停泵反省油的净化状况,假如真空泵内油的状况曾经被净化,则应该及时换油。换油之前泵需空载正转15分钟。让油加热后停泵旋开放油塞将污油放尽。用一些新油或许清洗用油清洗泵后注入新的真空泵油。( 新油為10#汽油或许机油)真空泵的维护和颐养可参照真空泵运用阐明书执行。

2. The vacuum pump should be shut down once a month to check the purification condition of oil saving. If the oil condition in the vacuum pump has been purified, the oil should be changed in time. The oil pump needs to be changed 15 minutes before no-load operation. After the oil is heated, stop the pump and open the oil plug to drain the dirty oil. After cleaning the pump with some new oil or cleaning oil, inject new vacuum pump oil. (new oil is 10 × gasoline or engine oil) the maintenance and maintenance of vacuum pump can refer to the operation instructions of vacuum pump.

3.常常反省蜗轮加速机油位。假如发现油位低于油窗高度1/2时应该及时参加30#机器油。

3. Often reflect on the oil level of worm gear accelerator. If it is found that the oil level is lower than 1 / 2 of the oil window height, it is necessary to timely participate in the 30 ° machine oil test.